Accessories

Posted on
CCFLs
CCFLs (Cold Cathode Fluorescent Lamp) – Clearance Sale
Replacing damaged or burnt out LCD CCFL bulbs and cartridges have never been easier with our brand new pre-wired CCFLs bulbs and cartridges. To find the correct replacement lamps, match your LCD screen size or the lamp’s measurement on our chart.
Flyer

MG36
MG36 Programmable LCD Controller
A very compact size LCD controller with analog RGB(VGA) and DVI video inputs. It supports TFT LCDs of 4:3, 5:4, 16:9, and 16:10 aspect ratios with resolutions from VGA (640 x 480) to WUXGA (1920 x 1200). To color depth is 24 bits (16,777,216 colors).
Datasheet
Please contact us at info@landmarktek.com to learn how we can assist you with your display needs.

LD200A
LD200A LED Backlight Driver
A high efficient, compact sized LED driver board that can operate the LED backlights in Landmark 10.4” to 15” VHB LCDs. With the dimming voltage from the MG36 LCD controller, the LD 200A can adjust the backlight over a brightness adjustment range from 100% to 4% (25:1 dimming ratio).
Datasheet

LD310-1
LD310 LED Backlight Driver
The LD310 is a high efficient LED driver board that operates the single LED strip backlights in Landmark VHB (very high brightness) LCD modules. It can drive one LED strip with a maximum current about 325 mA. Each LD310 is fine-tuned to drive a specific VHB LCD module before shipping.
Datasheet

LD320
LD320 LED Backlight Driver
The LD320 is a high efficient LED driver board that operates the LED backlights in Landmark 17” to 24” VHB (very high brightness) LCD modules. It can drive up to two LED strips with a maximum power about 16 Watts per strip. Each LD320 is fine-tuned to drive a specific VHB LCD module before shipping.
Datasheet

LCD-Kit
Standard and Custom LCD Kits
All LCDs in our new line have been selected for superior performance and value. Driven and powered by Landmark’s custom accessories, these cost-effective regular brightness kits can make designing your next application easier by providing a one stop shop for your display requirements.
Flyer
If the LCDs you are using are not listed above, Please contact us at info@landmarktek.com to learn how we can assist you with your display needs.

LED-Backlight-Input-Cable
Custom LED Backlight Driver Input Cable Solutions
Nearly all the LCDs with LED backlight have the LED driver build-in. There is connector (beside the LVDS connector) on the LCD PCB to provide the backlight power and the controls as shown below.
Datasheet
Please contact us at info@landmarktek.com to learn how we can assist you with your cable needs.